Electro Human Proof

So, you say you want PROOF that electro smog effects your body?  Then here it is!

Carlo Rubbia, the 1986 Nobel Laureate for physics, said:  "Only one billionth of the universe is matter.  The rest is information and energy."

Despite this knowledge, medicine continues to put its emphasis on the CHEMICAL (i.e.: mass) nature of a person's health and think that investigating a human's "electro health" is a waste of time---using much bended science to make their case.

Now, don't get me wrong.  I'm NOT saying that studying a person's biochemistry is a waste of time!  I spend countless hours reviewing a patient's toxic and nutritional biochemistry! 

I'm just saying that we should NOT IGNORE a person's electro health! 

These matter (ie: chemistry) oriented people believe we should spend all of our time studying the one billionth percent of us and ignore the majority electro portion of ourselves.

Why do these chemists ignore our electro health? 

One reason is because they are trained in chemistry and NOT physics.   And thus, these people have a hard time believing that we are "electro creatures"  --- "electrochemical creatures" to be more precise. 

Yes, these chemist people may believe in the EEG of the brain and the EKG of the heart and they may even be smart enough to know that every single cell in the body carries its own voltage called a 'potential'. 

But after that, they still don't understand that as an 'electro' creature our body is very sensitive to our environment's electromagnetic fields (EMF). 

The purpose of this page is to give you some 'undeniable proof' that our environment's EMF has a direct effect on our body's electro status, and thus, will whet your appetite to continue your research into studying the physics of EMFs on human health. 

AND the following "electrical signal photos" back up what our patients tell us daily:  That they feel less stressed, more relaxed, more blissful and smarter when they ground and add dirty electricity filters to their home!
*****

An oscilloscope is a device that will measure the "electrical signal" of something.  This is what an oscilloscope looks like:

File:Oscilloscope


When measuring an electrical signal, it can be in several different waveforms as show below:


Note:  When FPL sends us electricity, they are sending it to us in a SINE WAVEFORM-- top graph that looks like rolling hills.

The following "experiments" were performed by one of my "now believing" physicist patients and myself. 

We measured his body's "electrical signal" or "electrical signature" by keeping all environmental factors the same, and only changing one factor at a time and seeing how that changes his electrical signature as seen on the oscilloscope.  We have set the oscilloscope so that each vertical line (called a 'division) is equal to 50 millivolts.

This experimental process has three (3) major environments:

1.  A building with an analog meter
2.  A building with a non-transmitting digital meter
3.  A building with Smart Meter

Granted, a more perfect experiment would be staying in the same building and and changing the meter prior to each experiment.  But that simply isn't possible.  But we did take EMF readings of each building prior to these experiments.

*****

You may not realize this, but you are an "electro receiving antenna" that "picks up" any and all EMFs that are flying around you, and this oscilloscope is going to prove that fact.

*****
BUILDING WITH ANALOG METER (AM)

The following experiment was done in a home with an ANALOG METER.  The EMFs were measured.  An analog meter puts off no microwave radiation and no dirty electricity.  The magnetic and electric fields inside the room were very low.  The RF/Microwave fields were below detectible limit.

The following are the testing scenarios:
1. Analog, Ungrounded with no filters in house (EMI =240)
2. Analog, Grounded with no filters in house (EMI = 240)
3. Analog, Grounded, one filter, grounded through base of filter
4. Analog, Grounded, one filter in lower outlet, grounded through top outlet hole

1. Analog, ungrounded with no filters in house (EMI =240)

Note:  Notice the "rolling hills" of the 60 Hz sine wave coming from the electric company.  Granted, the sine wave is fuzzy with "dirty electricity", but at least it is still a 'rolling hills" sine wave. Notice that the sine wave goes up 1 vertical line and down 1 vertical line.  These lines are called a "division" and each vertical division is 50 millvolts.  In this experiment, his voltage is varying between -50 and +50 millivolts at 60 times per seconds (because in USA we use 60 Hz electricity and Hz=hertz=cycles per second).  


1-Analog_Ungrounded_no_filter_EMI_240






2. Analog, Grounded with no filters in house (EM=240)
Note:  Wow!  See how grounding reduced his voltage (ie: stress) from 1 division to almost a straight line (ie: zero voltage)?  The line is still fuzzy with "dirty electricity", but at least we are very close to a straight line of what our body prefers (which is direct current (DC)).

2-Analog_Grounded_no_filter_EMI_240






3. Analog, Grounded, one filter, grounded through base of filter (EMI=214)
Note:  In this example we decide to keep grounding but to add a dirty electricity filter.  Yikes!  It is far worse with a major increase in the person's voltage!  Why?  Because we put the grounding plug into the base of the filter.  Don't ground via putting ground cord into base of filter!  The EMI didn't reduce as much as we'd like because there are so many dirty electricity generators in this room.  Multiple filters will be needed to bring the EMI to a more tolerable <50 (lower the better).

5-Analog_Grounded_filter_power_on_lower_outlet






4. Analog, Grounded, one filter in lower outlet, grounded through top outlet hole (EMI = 214)
Note:  That's more like it.  Always ground through the top outlet as shown in pic below.  This home will need more filters to reduce the dirty electricity on this circuit.  OR the homeowner can shut off the circuit breaker to this outlet when grounding.

4-Analog_Grounded_filter_upper_outlet







BUILDING WITH NON-TRANSMITTING DIGITAL METER (NTDM)


The following experiment was done in a home with a NON-TRANSMITTING DIGITAL METER. Although this type of meter doesn't put off microwave emissions, it is still digital and thus, is a major producer of electromagnetic interference (EMI) or dirty electricity.   The EMFs were measured.  The magnetic and electric fields in the room were very low.  The RF/Microwave fields were below detectible limit.  He was tested under these conditions with no change in his sitting position etc.

The following are the testing scenarios:
1. NTDM, Ungrounded with no filters in house (EMI =257)
2. NTDM, Grounded with no filters in house (EMI = 257)
3. NTDM, Grounded, one filter, grounded through base of filter (EMI = 26)
4. NTDM, Grounded, one filter in lower outlet, grounded through top outlet hole (EMI=26)
5. NTDM, Grounded, one filter in lower outlet, grounded through top outlet hole, one more filter on circuit installed (EMI = 7)

1. NTDM, ungrounded with no filters in house (EMI =257)
Note:  The "rolling hills" sine wave of the analog meter is lost and replaced with sharp spikes.   This is due to the removal of the analog meter and replacement with a NTDM.   Look at all the jagged edges.  The voltage (vertical) is 1 line (ie: called "1 division").  Each vertical division is 50 millvolts.  In this experiment, his voltage is varying between -50 and +50 millivolts at 60 times per seconds (because in USA we use 60 Hz electricity and Hz=hertz=cycles per second).  


BNM-1_Ungrounded_No_Filter_RMI_257-1










2. NTDM, grounded with no filters in house (EMI = 257)

Note:  Voltage drastically dropped to <.5 division.  Jagged edges removed. But there is still the 'fuzz' which is the dirty electricity.

BNM-2_Grounded_No_Filter_RMI_257









3. NTDM, grounded, one filter in lower outlet, grounded through base of filter (EMI = 26)
Note:  EMI reduced 10x via the filter.  This is good.  However, we were absolutely SHOCKED by the worsening of his electrical signature and the doubling of his voltage to two divisions= 100 millivolts!  Why is this?  We opened the filter to find out why -- and called the manufacturer to alert them!  The filter manufacturer reviewed our research, agreed and has decided to change their design because so many people in the USA are using these filters with their grounding kits!   Absolutely shocking results!!! Moral of the story:  NEVER ground yourself through the base of the filter!!!!  In our opinion, this is biologically dangerous!

BNM-3_Grounded_Filter_EMI_26_Thru_Socket_on_Filter









4. NTDM, grounded, one filter in lower outlet, grounded through top outlet hole (EMI=26)

Note:  Now that's more like it!  That's what we expected to see in prior test but didn't.  Look at how even more voltage is removed and how all the fuzz (dirty electricity) is drastically reduced. This "flat" electrical signature is the closest to our direct current (DC) of our body.  ALSO, this is a picture of how you should ground with a dirty filter.

BNM-4_Grounded_Filter_EMI_26_Upper_Socket









stetzer_grounding

















5. NTDM, grounded, one filter in lower outlet, grounded trough top outlet hole, one more filter on circuit installed (EMI = 7)

Note:  Everything the same but we added one more filter on the circuit, reduced the EMI by another 67%.  This is the best reading we got.  The only reading that perhaps would have been better is by adding more filters and shutting off the breaker to this room (but then our oscilloscope would have stopped working!).

BNM-5_Grounded_Extra_Filter_EMI_7_Upper_Socket-1










6.  NTDM, learning from mistakes:  Ungrounded, one filter in lower outlet, EMI=26
As we were packing up to leave and while he was still attached to the oscilloscope we saw this ugly pattern appear--the worst of the worst--now 2.5 divisions = 125+ millivolts!  What happened?  This is what happened when he put his knee close to an electrical outlet that was pulling the power to run the oscilloscope!    For the past 20 years I've told patients to have their alarm clocks 8' from their bed (due to the magnetic field from the clock).  But now I see that isn't good enough if the cord to that alarm clock is plugged to socket near the patient's head!  Moral of the story:  Don't spend long periods of time, like sleeping, near an outlet that is powering a device!  And btw, another warning, many devices are actually pulling electricity when they appear 'off'.  For example, my CD player (no transformer) puts off I huge magnetic field even when the power is off.  The only way to ensure a device is off is via checking with a magnetic meter (ie: Trifield) OR pulling the plug!

BNM-7_Ungrounded_Filter_EMI_26_Upper_Socket_Knee_Next_to_Outlet








7.  Fixing the ugliness we found:  Grounded upper hole, one filter in lower outlet, EMI=26
Despite that bad exposure with his knee near the outlet, if he grounded himself while having his knee near the outlet, great improvement.  Down to 1/2 division= 25 millivolts.    Moral of story:  Stay away from outlets pulling power and keep grounded!

BNM-6_Grounded_Filter_EMI_26_Upper_Socker_Knee_Next_to_Outlet-1








BUILDING WITH SMART METER (SM)

The following experiment was done in a home with a SMART METER.  This type of meter puts off microwave radiation AND dirty electricity

The EMFs were measured.  The magnetic and electric fields were very low.  Although WiFi and cell phones were turned off, the RF/Microwave fields were still detectible as they were coming in from a WiFi hot spot coming from the church behind his house via the window he was sitting near.  He was tested under these conditions with no change in his sitting position etc.

The following are the testing scenarios:
1. SM, ungrounded with no filters in house
2. SM, grounded with no filters in house
3. SM, grounded, one filter in lower outlet, grounded through top outlet hole


1. SM, ungrounded with no filters in house
Note the increased spikes -- not even close to a rolling hills sine wave of analog or the semi-rolling hills of the non-transmitting digital.  The "voltage" (aka: "electrical pressure") is quite a bit -- as measured by how "tall" the triangle spikes are.  If you count the divisions, the "voltage pressure" 3.5 divisions on this graph.  That's a lot of 'voltage stress' -- unconscious stress that he may be unaware of but his body is sure aware of it!  That increased voltage is coming via the window's allowance of microwaves measured and coming from a nearby church's WiFi hotspot outside his window (as well as from his unblocked Smart Meter).

60_hz_ungrounded_man










2. SM, grounded with no filters in house
The filter is on the lower outlet, the grounding cord in the upper outlet.  See how much the the grounding reduced his voltage from 3.5 divisions to only 1.5 divisions.  While it is good that his voltage 'stress' is now much less, you will note quite a bit of static--that's the fuzziness.  That fuzz is the voltage his body is picking up from the outside cell tower and the electromagnetic interference (EMI) or  "dirty electricity" coming from his Smart Meter, his appliances as well as from his house wiring acting as an antenna and picking up stray electromagnetics in his home.  

It appears that grounding may have added more EMI to his waveform.  This is partially true because via grounded through his house wiring he is now being exposed to not only him being an antenna to all the EMFs in the air, but also he is now being exposed to his house wiring being an antenna as well to all these airborne EMFs.  However, NOT all that dirt came from grounding via the house wiring.  Much of the dirt is just now spread over a small amount of space (1.5 divisions) and thus, looks like more dirty electricity.

60_hz_grounded_man







3. SM, grounded, one filter in lower outlet, grounded through top outlet hole

See how much his voltage has dropped again from 1.5 divisions to <1 divisions. 

60_hz_grounded_man_with_greenwave_filter











ELECTRO PROOF SUMMARY

1.  Analog vs Digital meters:  A digital meter negatively impact a human's electrical signature via the introduction of dirty electricity into the person's home.

2.  Digital vs Smart meters:  A Smart meter negatively impacts a human's electrical signature via the introduction of dirty electricity AND microwaves into the person's home.

3.  Ambient microwaves, such as from WiFi, cell towers, cell phones, cordless phones, negatively impacts a human's electrical signature.

4.  Dirty electricity negatively impacts a human's electrical signature

5.  Grounding is highly effective at improving a human's electrical signature

6.  Grounding via a filter is highly effective at improving a human's electrical signature -- but only if grounding into the TOP outlet above the filter.

7.  The more filters, the greater the EMI reduction, the better the human's electrical signature.

8.  The shutting off of the circuit breaker to the room/grounding outlet improves the human's electrical signature.

9.  Ferrite beads are itty bitty filters (just like the outlet filters).  They collect stray EMI and release them as heat.   Putting a couple  ferrite beads on the grounding cord would improve the human's electrical signature as well as it would catch any stray signals just prior to entering the human body at the point of ground contact to the skin.

SUMMARY:
HUMAN ELECTRICAL SIGNATURE


1.) Ungrounded, 2.) grounded and 3.) grounded into top outlet with filter

This is the "electrical proof" behind the "bliss" our patients say they feel when they do not ignore the electro health of their body!


Analog FPL meter pics below:
1-Analog_Ungrounded_no_filter_EMI_2402-Analog_Grounded_no_filter_EMI_2404-Analog_Grounded_filter_upper_outlet







Digital, non-transmitting FPL meter pics below:
BNM-1_Ungrounded_No_Filter_RMI_257-1BNM-2_Grounded_No_Filter_RMI_257BNM-4_Grounded_Filter_EMI_26_Upper_Socket







Smart Meter FPL meter pics below:
60_hz_ungrounded_man60_hz_grounded_man60_hz_grounded_man_with_greenwave_filter







To the "science skeptics":

 So, does this 100% PROVE that EMR negatively effects the body?  No.

So, then, does this 100% PROVE that EMR is safe for the body? No.

So, then does this 100% PROVE that EMR effects the body?  Yes.

If you are a seeker of health,
you must take immediate efforts to not ignore your 'electro health'....




 
"Dark and difficult times lie ahead. 
Soon we must all face the choice between what is right and what is easy."
-Professor Dumbledore speaking to Harry Potter

"There are two types of pain you will go through in life,
the pain of discipline and the pain of regret.
Discipline weighs ounces while regret weighs tons."
-Jim Rohn


For an appointment, call us at 321-259-9090
or email: BeckNatMed@gmail.com

  Copyright 2008 - 2014 Beck Natural Medicine.  All rights reserved.
The content on this web are protected by U.S. and international copyright laws and may NOT be copied.
Any use of these materials without the express written consent of the Beck Natural Medicine, LLC is strictly prohibited.

Disclaimer:   The contents of this website are based on the opinion of Linnette M. Beck AP, DOM, unless otherwise noted. Individual articles, videos and audio are based upon the opinions of the respective author, who also retains his/her copyright.   Certain persons considered to be experts may disagree with one or more of the statements made on this website. Nonetheless, the statements concerning various nutritional, energetic and detoxification factors to structures and functions of the body are deemed to be based upon reliable authorities.   The information contained on this website is NOT considered medical advice and is NOT intended to replace a one-on-one relationship with a qualified health care professional.   The purpose of this website is to share information from both the experience and the meta-research of Linnette M. Beck AP, DOM. Linnette encourages you to "take your power back" and "empower yourself" by making your own health care decisions based upon your own research and teaming with qualified health care professionals

Medical Disclaimer:

All information contained within this website is intended for educational purposes only. Consumers should never disregard medical advice or delay in seeking it because of something they may have read on this website.

FDA Disclaimer:   Statements, services, products and educational materials appearing on this website have not been evaluated nor approved by the Food and Drug Administration (FDA) and are not intended to diagnose, treat, cure or prevent any disease.   Bioenergetic testing devices are NOT diagnostic medical systems nor are they claimed to operate as such.

---------------------------------------------------------------------------

It is DIFFICULT to get a man to understand something
when his SALARY depends on him NOT UNDERSTANDING IT.
Upton Sinclair


Best Website Builder
  Site Map